Brother-pr655-embroidery-machine - Revision history

Mwalsh: jh

2026-07-17T19:42:57Z

← Older revision		Revision as of 14:42, 17 July 2026
Line 13:		Line 13:
	'''Date'''		'''Date'''

	9/8/~~2021~~		07/01/2026
	\|}		\|}
	[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655]]		[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655]]
Line 43:		Line 43:
	= SAFETY =		= SAFETY =

	This is generally considered a safe machine, however any machine that is used improperly could be hazardous. While sewing always keep ~~the~~ hands clear of the embroidery area.		This is generally considered a safe machine, however any machine that is used improperly could be hazardous. While sewing always keep hands clear of the embroidery area.

	= PROCEDURE =		= PROCEDURE =
	~~'''Design:'''~~ Power on the machine, power button is located on the back right. Touch screen to begin. There are several designs to choose from Check the machine to see what kind of attachments are in place and to make sure all of the needles are threaded. Chose a fabric and stabilizer and attach to a 'Fast Frame' (this is the most convenient and commonly used style of attaching your work piece to the machine) stabilizers are set underneath your fabric of choice (unless you embroidering on a knit fabric those require a special top stabilizer). Setup the design in the machine and embroider.		Power on the machine, power button is located on the back right. Touch screen to begin. There are several designs to choose from Check the machine to see what kind of attachments are in place and to make sure all of the needles are threaded. Chose a fabric and stabilizer and attach to a 'Fast Frame' (this is the most convenient and commonly used style of attaching your work piece to the machine) stabilizers are set underneath your fabric of choice (unless you embroidering on a knit fabric those require a special top stabilizer). Setup the design in the machine and embroider.

	== My First Embroidery ==		== My First Embroidery ==

Mwalsh: ufsyuk

2026-07-09T15:17:58Z

ufsyuk

← Older revision		Revision as of 10:17, 9 July 2026
Line 76:		Line 76:
	##Watch your project happen! If you have any trouble along the way check out the troubleshooting section. When it's finished detach everything and trim or tear away your stabilizer.		##Watch your project happen! If you have any trouble along the way check out the troubleshooting section. When it's finished detach everything and trim or tear away your stabilizer.
	##Tidy up and done!		##Tidy up and done!

Mwalsh: rdjgj

2026-07-09T15:04:13Z

rdjgj

← Older revision		Revision as of 10:04, 9 July 2026
Line 46:		Line 46:

	= PROCEDURE =		= PROCEDURE =
	'''Design:''' Power on the machine, power button is located on the back right. Touch screen to begin. There are several designs to choose from Check the machine to see what kind of attachments are in place and to make sure all of the needles are threaded. Chose a fabric and stabilizer and attach to a 'Fast Frame' (this is the most convenient and commonly used style of attaching your work piece to the machine) stabilizers are set underneath your fabric of choice (unless you embroidering on a knit fabric those require a special top stabilizer).		'''Design:''' Power on the machine, power button is located on the back right. Touch screen to begin. There are several designs to choose from Check the machine to see what kind of attachments are in place and to make sure all of the needles are threaded. Chose a fabric and stabilizer and attach to a 'Fast Frame' (this is the most convenient and commonly used style of attaching your work piece to the machine) stabilizers are set underneath your fabric of choice (unless you embroidering on a knit fabric those require a special top stabilizer). Setup the design in the machine and embroider.

	== My First Embroidery ==		== My First Embroidery ==

Mwalsh: minor

2026-07-09T15:02:44Z

minor

← Older revision		Revision as of 10:02, 9 July 2026
Line 43:		Line 43:
	= SAFETY =		= SAFETY =

	This is generally considered a safe machine, however any machine that is used improperly could be hazardous~~. It's important to know that when you turn on the machine head will move as the machine reorients it's self to find "home"~~. While sewing always keep the hands clear of the embroidery area.		This is generally considered a safe machine, however any machine that is used improperly could be hazardous. While sewing always keep the hands clear of the embroidery area.

	= PROCEDURE =		= PROCEDURE =

Mwalsh: picture

2026-07-09T15:01:29Z

picture

← Older revision		Revision as of 10:01, 9 July 2026
Line 15:		Line 15:
	9/8/2021		9/8/2021
	\|}		\|}
	[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655~~\|left~~]]		[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655]]
	= GENERAL =		= GENERAL =
	{\| class="wikitable"		{\| class="wikitable"

Mwalsh: sections 3, 4

2026-07-09T14:54:51Z

sections 3, 4

← Older revision		Revision as of 09:54, 9 July 2026
Line 118:		Line 118:

	== My Third Embroidery ==		== My Third Embroidery ==
			''Custom embroidery digitizing with Inkstitch'' https://www.youtube.com/watch?v=mPaGwjwpzWc

	== My Forth Embroidery ==		== My Forth Embroidery ==
			''Embroidering a hat'' https://www.youtube.com/watch?v=koOPpVUuSC4

	~~= Attachments =~~


Line 133:		Line 134:
	* The '''tension''' is not this issue as frequently as one might think. Ancel, our area Shop Captain has spent a lot of time understanding and tinkering with tension on this machine to get it into tip-top shape. Adjusting tension dramatically will likely ''not'' yield the desired results. If you are adjusting tension for trouble shooting please do so thoughtfully always being able to return the tension to its original position if that was not in fact the issue.		* The '''tension''' is not this issue as frequently as one might think. Ancel, our area Shop Captain has spent a lot of time understanding and tinkering with tension on this machine to get it into tip-top shape. Adjusting tension dramatically will likely ''not'' yield the desired results. If you are adjusting tension for trouble shooting please do so thoughtfully always being able to return the tension to its original position if that was not in fact the issue.

	~~= MAINTENANCE =~~		= <big>REFERENCE</big> =

	== <big>REFERENCE</big> ==
	* Hat attachment video (https://www.youtube.com/watch?v=koOPpVUuSC4)		* Hat attachment video (https://www.youtube.com/watch?v=koOPpVUuSC4)
	* Custom embroidery digitizing with Inkstitch (https://www.youtube.com/watch?v=mPaGwjwpzWc)		* Custom embroidery digitizing with Inkstitch (https://www.youtube.com/watch?v=mPaGwjwpzWc)

Mwalsh: second project

2026-07-09T14:49:12Z

second project

← Older revision		Revision as of 09:49, 9 July 2026
Line 51:		Line 51:
	''Embroider your initials''		''Embroider your initials''
	[[File:Letters .jpg\|left\|thumb\|256x256px\|Step 1.4 ]]		[[File:Letters .jpg\|left\|thumb\|256x256px\|Step 1.4 ]]
	This is a predetermined project laid out step-by-step to guide you in ~~acquiring~~ base knowledge for this tool.		This is a predetermined project laid out step-by-step to guide you in practicing base knowledge for this tool.
	[[File:Fast frame .jpg\|left\|thumb\|259x259px\|Fast Frames Step 2.1 ]]		[[File:Fast frame .jpg\|left\|thumb\|259x259px\|Fast Frames Step 2.1 ]]
	[[File:My First Project .jpg\|left\|thumb\|263x263px\|My First Project ]]		[[File:My First Project .jpg\|left\|thumb\|263x263px\|My First Project ]]
Line 62:		Line 62:
	##When you are ready to progress to the next step press "SET"		##When you are ready to progress to the next step press "SET"
	##Notice the size of your piece (you may adjust size or rotation in this screen)		##Notice the size of your piece (you may adjust size or rotation in this screen)
	##~~Press~~ "END EDIT"		##when your finished editing press "END EDIT"
	#'''It's time to set up the work area.'''		#'''It's time to set up the work area.'''
	##Keeping in mind your project size choose a "fast track" or "fast frame" (they are the same thing, names used interchangeably name) These ~~are items~~ are the most typical attachment used, and is the most likely to be set up at the machine when you arrive. They are stored over the work bench.		##Keeping in mind your project size choose a "fast track" or "fast frame" (they are the same thing, names used interchangeably name) These are the most typical attachment used, and is the most likely to be set up at the machine when you arrive. They are stored over the work bench. (Image 2.1)
	##Choose your fabric, a piece of cotton or lightweight canvas should do nicely.		##Choose your fabric, a piece of cotton or lightweight canvas should do nicely.
	##Find the "stabilizer" this is used on every embroidery project to, well... stabilize the piece while embroidering. It's white and semi opaque. Typically lives under the embroidery work bench or in embroidery storage to the right of the machine.		##Find the "stabilizer" this is used on every embroidery project to, well... stabilize the piece while embroidering. It's white and semi opaque. Typically lives under the embroidery work bench or in embroidery storage to the right of the machine.
	##Cut both the fabric and stabilizer to fit the chosen fast frame, the stabilizer goes on the top then the fabric on top of that. Attach using binder clips.		##Cut both the fabric and stabilizer to fit the chosen fast frame, the stabilizer goes on the top of the fast frame then the fabric on top of that. Attach using binder clips.
	##Great! Now its time to attach the fast frame to the Fast Frame "Arm" (if is not already there follow the steps in this video: https://youtu.be/S3WEFdFloas?si=fVz_3zm2kZFeg5Cv > second 56) If the frame is attached this should be as simple as loosening the middle knob, putting on the fast frame and tightening the knob to secure the frame.		##Great! Now its time to attach the fast frame to the Fast Frame "Arm" (if the fast frame receiver is not already there follow the steps in this video: https://youtu.be/S3WEFdFloas?si=fVz_3zm2kZFeg5Cv > second 56) If the frame is attached this should be as simple as loosening the middle knob, putting on the fast frame and settling it into place, and tightening the knob to secure the frame.
	##Check the thread color in the first position this will be your color for your first project. ~~(do the second project to learn to change colors)~~		##Check the thread color in the first position this will be your color for your first project.
	# '''Embroider'''		# '''Embroider'''
	##Now you're ready to trace out your initials to make sure they fit on your workspace. Use the trace button (white square with a dotted line around it) if the needles hit metal the are likely to break.		##Now you're ready to trace out your initials to make sure they fit on your workspace. Use the trace button (white square with a dotted line around it) if the needles hit metal the are likely to break. Change size of your embroidery in previous screens if needed.
	##You are ready to embroider. Push the "SEWING" button to advance to the next screen		##You are ready to embroider. Push the "SEWING" button to advance to the next screen
	##Push the lock button on the screen and the arrow below will flash green the machine will begin sewing now!		##Push the lock button on the screen and the arrow below will flash green push that too the machine will begin sewing now!
	##Watch your project happen! When it's finished detach everything and trim or tear away your stabilizer.		##Watch your project happen! If you have any trouble along the way check out the troubleshooting section. When it's finished detach everything and trim or tear away your stabilizer.
	##Tidy up and done!		##Tidy up and done!






	== My Second Embroidery ==		== My Second Embroidery ==
			''Multicolor preloaded design''
			[[File:Thread icon position number .jpg\|thumb\|Position number image 1.8 ]]
			Many steps from the first project will repeat here. New steps are italicized.
			#'''Setting up the design'''
			## Turn on the Machine (a little song to welcome you chimes)
			##Touch screen to begin
			##"The machine will move" message pops (its not lying) move your hands and press "OK"
			##''Choose a multicolor design'' ''and press "SET"''
			##Notice the size of your piece in the middle grey bar (you may adjust size or rotation in this screen)
			##When your finished editing press "END EDIT"
			##Press "SEWING"
			##''When you are in the sewing screen notice the thread icons, the numbers next to them represent thier position on the machine (positions 1-6). (image 1.8) The colors that show up on the screen represent the colors seen in the design. This is obvious but, the colors on the physical thread rack on the back of the machine are the colors that will actually be embroidered in thier corresponding position. We won't go into changing the color of the tread spool icon, only the changing of the physical thread.''
			#'''''Changing threads.'''''
			##''Cut the string for the previous position one thread just above the spool.''
			##''Remove the previous thread and put your chosen thread in its place. Embroidery threads are stored next to the machine on the metal rack.''
			##''Without pulling the previous thread too much tie the two tails together. You will be using the previous thread as a guide to pull the new thread through the machine, this is much faster than than threading the machine by hand and works very well, however it is very good to learn the threading process so that you can know when there is a threading issue when troubleshooting. How to thread : https://www.youtube.com/watch?v=Vk_xvHxAVv4''
			##''Remove the lowest part of the thread from the needle only. Pull the thread from the bottom and watch it pull all the way through the machine.''
			##''Thread the needle leaving a bit of a tail.''
			##''Repeat those steps for each thread position.''
			#'''It's time to set up the work area.'''
			##Keeping in mind your project size choose a "fast track" or "fast frame" (they are the same thing, names used interchangeably name) These are the most typical attachment used, and is the most likely to be set up at the machine when you arrive. They are stored over the work bench. (Image 2.1)
			##Choose your fabric, a piece of cotton or lightweight canvas should do nicely.
			##Find the "stabilizer" this is used on every embroidery project to, well... stabilize the piece while embroidering. It's white and semi opaque. Typically lives under the embroidery work bench or in embroidery storage to the right of the machine.
			##Cut both the fabric and stabilizer to fit the chosen fast frame, the stabilizer goes on the top of the fast frame then the fabric on top of that. Attach using binder clips.
			##Great! Now its time to attach the fast frame to the Fast Frame "Arm" (if the fast frame receiver is not already there follow the steps in this video: https://youtu.be/S3WEFdFloas?si=fVz_3zm2kZFeg5Cv > second 56) If the frame is attached this should be as simple as loosening the middle knob, putting on the fast frame and settling it into place, and tightening the knob to secure the frame.
			##Check the thread color in the first position this will be your color for your first project.
			# '''Embroider'''
			##Now you're ready to trace out your initials to make sure they fit on your workspace. Use the trace button (white square with a dotted line around it) if the needles hit metal the are likely to break. Change size of your embroidery in previous screens if needed.
			##You are ready to embroider. Push the "SEWING" button to advance to the next screen
			##Push the lock button on the screen and the arrow below will flash green push that too the machine will begin sewing now!
			##Watch your project happen! If you have any trouble along the way check out the troubleshooting section. When it's finished detach everything and trim or tear away your stabilizer.
			##Tidy up and done!


	== My Third Embroidery ==		== My Third Embroidery ==
Line 88:		Line 126:
	= TROUBLESHOOTING =		= TROUBLESHOOTING =

	* Always check that the machine is '''threaded properly''', sewing machines of any kind are notoriously particular when it comes to threading, the tiniest missed detail can lead to problems obvious in the quality of your product.		* Always check that the machine is '''threaded properly''', sewing machines of any kind are notoriously particular when it comes to threading, the tiniest missed detail can lead to problems obvious in the quality of your product. https://www.youtube.com/watch?v=Vk_xvHxAVv4
	* Make sure '''tread tail''' is long enough to not pull out of the needle as soon sewing begins		* Make sure '''tread tail''' is long enough to not pull out of the needle as soon sewing begins
	* Make sure the '''bobbin spool''' is seated correctly. There is a magnet in these fancy pre-wound bobbins we buy, the magnet should always face in towards the metal bobbin case. If the spool is not turning in the correct direction or if its not seated well the machine will be embroidering will be interrupted regularly with error messages and your piece will be low quality.		* Make sure the '''bobbin spool''' is seated correctly. There is a magnet in these fancy pre-wound bobbins we buy, the magnet should always face in towards the metal bobbin case. If the spool is not turning in the correct direction or if its not seated well the machine will be embroidering will be interrupted regularly with error messages and your piece will be low quality.

Mwalsh at 15:06, 25 June 2026

2026-06-25T15:06:06Z

← Older revision		Revision as of 10:06, 25 June 2026
Line 50:		Line 50:
	== My First Embroidery ==		== My First Embroidery ==
	''Embroider your initials''		''Embroider your initials''
	~~[[File:My First Project .jpg\|left\|thumb\|257x257px\|My First Project ]]~~
	[[File:Letters .jpg\|left\|thumb\|256x256px\|Step 1.4 ]]		[[File:Letters .jpg\|left\|thumb\|256x256px\|Step 1.4 ]]
	This is a predetermined project laid out step-by-step to guide you in acquiring base knowledge for this tool.		This is a predetermined project laid out step-by-step to guide you in acquiring base knowledge for this tool.
	[[File:Fast frame .jpg\|left\|thumb\|259x259px\|Fast Frames Step 2.1 ]]		[[File:Fast frame .jpg\|left\|thumb\|259x259px\|Fast Frames Step 2.1 ]]
			[[File:My First Project .jpg\|left\|thumb\|263x263px\|My First Project ]]
	# '''Setting up the design'''		# '''Setting up the design'''
	## Turn on the Machine (a little song to welcome you chimes)		## Turn on the Machine (a little song to welcome you chimes)
	##Touch screen to begin		##Touch screen to begin
	##"The machine will move" message pops (its not lying) move your hands and press "OK"		##"The machine will move" message pops (its not lying) move your hands and press "OK"
	##Choose one color font (see photo "step 1.4" )		##Choose one color font (see photo "step 1.4" )

Mwalsh: adding pictures

2026-06-24T15:45:24Z

adding pictures

← Older revision		Revision as of 10:45, 24 June 2026
Line 15:		Line 15:
	9/8/2021		9/8/2021
	\|}		\|}
	[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655]]		[[File:Embroidery.jpg\|thumb\|Embroidery with the Brother PR655\|left]]
	= GENERAL =		= GENERAL =
	{\| class="wikitable"		{\| class="wikitable"
Line 49:		Line 49:

	== My First Embroidery ==		== My First Embroidery ==
	''Embroider your initials''		''Embroider your initials''
			[[File:My First Project .jpg\|left\|thumb\|257x257px\|My First Project ]]
	This is a predetermined project laid out step-by-step to guide in acquiring ~~the~~ base knowledge for this tool.		[[File:Letters .jpg\|left\|thumb\|256x256px\|Step 1.4 ]]
			This is a predetermined project laid out step-by-step to guide you in acquiring base knowledge for this tool.
	# Setting up the design		[[File:Fast frame .jpg\|left\|thumb\|259x259px\|Fast Frames Step 2.1 ]]
	## Turn on the Machine (a little song to welcome you chimes)		# '''Setting up the design'''
	##Touch screen to begin		## Turn on the Machine (a little song to welcome you chimes)
	##"The machine will move" message pops (its not lying) press "OK"		##Touch screen to begin
	##Choose one color ~~letters~~ (see photo 1)		##"The machine will move" message pops (its not lying) move your hands and press "OK"
	##Choose your letters		##Choose one color font (see photo "step 1.4" )
	##~~when~~ you are ready to progress to the next step press "SET"		##Choose your letters
	##Notice the size of your piece (you may adjust size in this screen)		##When you are ready to progress to the next step press "SET"
	##Press "END EDIT"		##Notice the size of your piece (you may adjust size or rotation in this screen)
	##It's time to set up the work area.		##Press "END EDIT"
	###Keeping in mind your project size choose a "fast track" or "fast frame" (they are the same thing, names used interchangeably name) These are items are the most typical attachment used, and is the most likely to be set up at the machine when you arrive. They are stored over the work bench.		#'''It's time to set up the work area.'''
	###Choose your fabric, a piece of cotton or ~~light~~ canvas should do nicely.		##Keeping in mind your project size choose a "fast track" or "fast frame" (they are the same thing, names used interchangeably name) These are items are the most typical attachment used, and is the most likely to be set up at the machine when you arrive. They are stored over the work bench.
	###Find the "stabilizer" this is used on every embroidery project to, well... stabilize the piece while embroidering. It's white and semi opaque. Typically lives under the embroidery work bench or in embroidery storage to the right of the machine.		##Choose your fabric, a piece of cotton or lightweight canvas should do nicely.
	###Cut both the fabric and stabilizer to fit the chosen fast frame, the stabilizer goes on the top then the fabric on top of that. Attach using binder clips.		##Find the "stabilizer" this is used on every embroidery project to, well... stabilize the piece while embroidering. It's white and semi opaque. Typically lives under the embroidery work bench or in embroidery storage to the right of the machine.
	###Great! Now its time to attach the fast frame to the Fast Frame "Arm" (if is not already there follow the steps in this video: https://youtu.be/S3WEFdFloas?si=fVz_3zm2kZFeg5Cv > second 56) If the frame is attached this should be as simple as loosening the middle knob, putting on the fast frame and tightening the frame ~~down~~.		##Cut both the fabric and stabilizer to fit the chosen fast frame, the stabilizer goes on the top then the fabric on top of that. Attach using binder clips.
	###Check the thread color in the first position this will be your color for your first project. (do the second project to learn to change colors)		##Great! Now its time to attach the fast frame to the Fast Frame "Arm" (if is not already there follow the steps in this video: https://youtu.be/S3WEFdFloas?si=fVz_3zm2kZFeg5Cv > second 56) If the frame is attached this should be as simple as loosening the middle knob, putting on the fast frame and tightening the knob to secure the frame.
	##Now you're ready to trace out your initials to make sure they fit on your workspace. Use the trace button (white square with a dotted line around it) if the needles hit metal the are likely to break.		##Check the thread color in the first position this will be your color for your first project. (do the second project to learn to change colors)
	##You are ready to embroider. Push the "SEWING" button to advance to the next screen		# '''Embroider'''
	##Push the lock button on the screen and the arrow below will flash green the machine will begin sewing now!		##Now you're ready to trace out your initials to make sure they fit on your workspace. Use the trace button (white square with a dotted line around it) if the needles hit metal the are likely to break.
	##Watch your project happen! When it's finished detach everything and trim or tear away your stabilizer.		##You are ready to embroider. Push the "SEWING" button to advance to the next screen
	##Tidy up and done!		##Push the lock button on the screen and the arrow below will flash green the machine will begin sewing now!
			##Watch your project happen! When it's finished detach everything and trim or tear away your stabilizer.
			##Tidy up and done!

	== My Second Embroidery ==		== My Second Embroidery ==

Mwalsh: project one

2026-06-23T21:15:49Z

project one

@@ Line 54: / Line 54: @@
 # Setting up the design
-## Turn on the Machine (the Machine head will move when powering on)
+## Turn on the Machine (a little song to welcome you chimes)
-##
+##Touch screen to begin
 == My Second Embroidery ==